Polycell Stain Stop

STAIN STOP: -is a product which is highly pigmented and permanently prevents stains re-appearing through paint. It can be used to cover grease, crayon, water stains & nicotine. Stain Stop can be applied to plaster, masonry & wood. Use on internal surfaces only.

How to use

Ensure surface is clean, dry and free from loose material.
When applying it is advisable to wear eye protection.
When stopping stains caused by water or damp, make sure that the original cause of the problem has been rectified.
Shake well until you hear the steel pellet rattling and then continue for 1 minute more.
Spray evenly over stain from a distance of 20-30 cm (9"-12") until stain is fully covered.
Allow at least 10 minutes to dry before painting or wallpapering.
For especially stubborn stains, allow Polycell One Coat Stain Stop to dry fully, then apply a second coat.
If over painting with gloss or eggshell paint, first prime treated areas with water based paint.
After use, invert the can and spray until nozzle is cleared to prevent clogging

Cautions

Pressurised container: Protect from sunlight and do not expose to temperatures exceeding 50 degrees.. Do not pierce or burn even after use. Do not breath spray / vapour. Use only in a well ventilated area.

Storage

Store safely.

Available in the following sizes

250ml and 500ml aerosols

All Orders over £100 have FREE delivery

Current rating is 0.00. Total votes 0.

Product reviews